Home Improvement Guides
Expert NZ-specific advice for every home project — from cost estimates to material comparisons.
6,205 articles
Can I Use Concrete to Repair a Broken Clay Drain Pipe Section Myself?
Concrete isn't the right fix for a broken clay drain pipe. Learn what NZ regulations say about DIY drain repairs and when you must call a licensed drainlayer.
How to Safely Dispose of Small Asbestos Cement Offcuts at a NZ Tip
Disposing of asbestos cement offcuts in NZ requires careful wrapping, labelling, and taking them to an approved facility. Here's how to do it safely.
Does a Roofer in NZ Need to Hold an LBP Licence for All Work?
Not all roofing work in NZ requires an LBP licence, but certain jobs do. Here's what you need to know before hiring a roofer.
How Do I Work Out Quantities of Bricks Needed for a Garden Feature Wall?
Calculate bricks for a garden feature wall by working out the wall area, choosing your brick size, and adding a waste allowance. Here's how.
How to Correctly Fit a Toe Board to a Scaffold Platform Edge
Toe boards stop tools and materials falling from scaffold platforms. Here's how to fit them correctly and safely to NZ standards.
What Payment Terms Should You Expect When Hiring a Painter in NZ?
Learn about typical deposit amounts, progress payments, and final invoicing when hiring a painter in New Zealand so you know what's fair.
Can I Install a Cabinet Above a Toilet Without Professional Help?
Yes, in most cases a handy homeowner can install a cabinet above a toilet themselves — here's what you need to know to do it safely and correctly.
How to Build a Retaining Wall That Can Handle Heavy Vehicle Loads Above
Building a retaining wall under vehicle loads requires careful engineering, the right materials, and often a building consent. Here's what NZ homeowners need to know.
How to Cut a Clean Circle or Curve in Brickwork for a Pipe
Cutting a neat circular hole in brickwork for a pipe takes the right tools and technique. Here's how to do it cleanly and safely.
Can I Use a Circular Saw to Rip Decking Boards to a Narrower Width?
Yes, you can rip decking boards narrower with a circular saw — here's how to do it safely and accurately every time.
How to Install Stepping Stones Alongside an Existing Driveway
Installing stepping stones beside your driveway is a satisfying DIY project. Here's how to plan, prepare, and lay them properly for a long-lasting result.
What Trade Qualifications Does a Professional Joiner Hold in NZ?
NZ joiners typically hold a New Zealand Certificate in Joinery, earned through an apprenticeship combining on-the-job training with formal study.
What to Do If Your Heat Pump Installer Damages Your Wall During Installation
Wall damage during heat pump installation is stressful, but you have clear rights. Here's how to handle it step by step in New Zealand.
Can I Excavate a Hillside Bank to Create a Flat Parking Area?
Yes, but hillside excavation involves consent checks, retaining walls, and safety risks. Here's what NZ homeowners need to know before digging.
How to Treat Sooty Mould Caused by Aphids on Your Trees
Sooty mould on trees is caused by aphids. Learn how to identify, treat, and prevent it with practical NZ advice.
Can a Handyman Legally Install a Heat Pump or Ventilation System in NZ?
In NZ, heat pump installation involves restricted electrical and refrigerant work that legally requires licensed tradespeople — not a general handyman.
How to Stop Finish from Pooling in the Gaps Between Floorboards
Finish pooling in floorboard gaps causes sticky patches and a poor result. Here's how to prevent it with the right technique and products.
How to Protect Your Lawn When Moving Heavy Machinery Across It
Heavy machinery can destroy a lawn in minutes. Learn practical NZ techniques to protect your grass, soil, and drainage when earthmoving equipment must cross your property.
What Causes Roof Paint to Chalk and How Do I Fix It Myself?
Chalking is a common roof paint problem caused by UV breakdown. Learn what causes it and how to clean and repaint your roof yourself.
Can I Weld a Broken Steel Loading Ramp Hinge Myself?
You can weld a broken steel loading ramp hinge yourself if you have the right skills and equipment, but safety and weld quality are critical for load-bearing repairs.
How to Set Steel Reinforcing Mesh at the Correct Height in a Concrete Slab
Correct mesh placement is critical for slab strength. Learn how to position reinforcing mesh at the right height using chairs, bar supports, and simple checks.
How to Join Two Fence Sections at an Angle: The Best Methods Explained
Joining fence sections at an angle requires the right post setup and hardware. Here's how to do it properly for a strong, lasting result.
How to Waterproof a Shower Floor Hob to Stop Water Escaping
A properly waterproofed shower hob keeps water inside the shower. Learn the correct NZ method, materials, and when to call a professional waterproofer.
Can I Replace a Caravan or Motorhome Door Lock Myself in NZ?
Yes, replacing a caravan or motorhome door lock is generally a DIY-friendly job in NZ — no restricted trade licence is required for this work.
How to Fix a Window Handle That Spins Without Catching the Latch
A spinning window handle usually means worn gears or a loose spindle. Here's how to diagnose and fix it yourself.
How to Tile a Bathroom Floor Around a Floor Waste Drain
Tiling around a floor waste drain requires careful planning, the right fall, and waterproofing to meet the NZ Building Code. Here's how to do it properly.
How to Lay Flooring in a Long Narrow Hallway for the Best Result
Laying flooring in a narrow hallway takes careful planning. Learn the best direction, prep steps, and techniques for a professional finish.
What Happens If My Builder Goes Out of Business Mid-Project?
If your builder goes bust mid-build, you could face delays, extra costs, and legal headaches. Here's what to do and how to protect yourself in NZ.
What to Expect During a Plastering Job: Dust, Disruption and How to Prepare
Plastering creates dust, noise and drying time. Here's what NZ homeowners can realistically expect and how to minimise the hassle.
Can I Take Down a Freestanding Brick Barbecue Structure Myself?
Yes, in most cases a homeowner can demolish a freestanding brick barbecue themselves — but there are safety and consent checks to do first.
Why Does My Gas Oven Cook Unevenly on One Side?
Uneven cooking in a gas oven is usually caused by a blocked burner, poor calibration, or airflow issues — most of which you can diagnose yourself.
Does Adding a Deck to My NZ Home Require a Building Consent?
Whether your new deck needs a building consent in NZ depends on its size, height, and location. Here's what you need to know before you build.
Can I Render a Small Exterior Wall in Sections Without Visible Joins?
Yes, but only with careful planning. Learn how to render in sections and avoid unsightly join lines on your exterior wall.
Can I Insulate a Shipping Container Home Myself Using Batts?
Yes, you can install batt insulation in a shipping container home yourself, but there are important moisture, condensation, and building code considerations to get right first.
How to Safely Install a Double Powerpoint to Replace a Single in NZ
Replacing a single powerpoint with a double is restricted electrical work in NZ. Here's what you need to know before touching a thing.
How to Get Rid of Convolvulus in Garden Beds Without Chemicals
Convolvulus is one of NZ's toughest weeds, but you can beat it without sprays using smothering, digging, and persistence.
